The TV, which is hung on the wall, looks stylish and original. This option allows you to save the overall space of the room. In this case, an important question arises, how to hide the wires from the TV on the wall, which should be considered not only from an aesthetic point of view, but also for security purposes. There are several solutions to this problem, detailed in this article, which are also suitable for masking cables from other office equipment.
- 1 Wall Mounting Tips
- 2 How to hide TV wires on the wall: ways to decorate wiring
- 3 How to hide wires from a TV into a wall: rules for internal masking
- 4 How to hide wires on the floor or ceiling: basic recommendations
- 5 How to hide the wires from the TV on the wall using a box
- 6 How to hide wires in an apartment using furniture elements
- 7 Useful tips for masking wires for TV and other equipment
Wall Mounting Tips
Mounting the TV on a wall saves the overall space in the room by adding spaciousness. This is achieved due to the absence of TV stands and bulky stands in the interior.
Not every TV model can be wall-hung. It all depends on the weight of the product and the material of the wall surface. It is also important to choose reliable bolts to mount the TV... The wall must be strong enough to support the weight of the chosen model. A concrete or brick surface is a suitable option. If the TV will be mounted to a plasterboard wall, you should additionally reinforce the installation site with embedded parts. To mount the device, use special dowels or bolts for attaching to the TV bracket.
Important! The TV set should not be located near heating appliances or places where direct sunlight falls.
When mounting the device on a wall, ensure that there is sufficient clearance for unobstructed ventilation. If the appliance is built into a niche, there should be a distance of about 10 cm at the back, which is necessary for ventilation and cooling of the TV. This is especially important for plasma displays. The mounting location is selected in such a way as to exclude the possibility of screen glare, which will create discomfort when viewing the device in the daytime, since the light from the window will be reflected in the image.
Important! When deciding how to mount a TV on the wall, you need to determine the location of additional equipment to it in order to install the required number of outlets, as well as think over options for hidden placement of cable products.
The height of the TV on the wall is of no small importance. The ideal option is the location of the geometric center of the appliance opposite the eye level of the beholder. Such placement is able to provide the highest quality perception of the picture. In this case, the height of the sofa or chair is taken into account.
How to hide TV wires on the wall: ways to decorate wiring
The simplest and most original solution to the question of how to beautifully hide the wires on the wall are various options for external masking of the cable. It can be hidden behind a wardrobe, curtains, live plants. If there is a stand under the TV, the hanging wires should be placed in a vertical box, from which small shelves will extend. Thus, an aesthetic and functional design can be obtained.
Decorative panels made of plastic, wood, leather or metal give a good effect. They can differ in different shapes and sizes, covering the wall completely or partially, hiding only cable products. The decorative finish of the wall faced with natural stone or artificial brick in the area of the TV has an original look. Different design options are shown in a selection of photos that clearly illustrate how to disguise the wires from the TV on the wall.
The cables do not need to be made invisible. With the help of design tricks, they can be turned into decorative elements. For this purpose, special boxes, silicone linings of various configurations, different materials of manufacture and color design, as well as curly elements are used.
Useful advice! To fix the cables to the wall, you can use ready-made plastic clamps, which can be curly or invisible.
For a loft-style room, you can use channels that imitate brickwork. Decor from small metal structures will look organic. A composition of television branches, made in the form of pipes, will successfully fit into the high-tech style. In this case, the wiring is fixed to the wall with nails or screws.
In a classic room, you can hang the TV on the wall using wood elements. This design is also suitable for country styles of country and Provence. The composition can be supplemented with butterflies, birds, flowers. It will be interesting to look at a small fence with a growing shrub.
How to decorate TV wires on the wall: stylish design solutions
From wires, you can lay out on the wall an original composition of a specific theme. However, the cable must be of sufficient length for the drawing to appear complete. The process begins by sketching the image on the wall using a simple pencil. When deciding how to hide wires in the kitchen, it is worth using curly twisting technology, which gives a good visual effect. To do this, using wires, you can lay out a geometric figure on the wall.
Important! When decorating cables on the wall, special attention should be paid to the fixing elements, which should not violate the integrity of the wires and not expose them to friction, which will accelerate wear.
If the cable is short or a complex ornament does not fit into the existing interior, you can make an original edging using wires.Branches of green plants decorated with voluminous paper flowers look spectacular. Using a television or computer wire, you can create an imitation of a tree branch and decorate it with leaves. If the cable is long, you can lay out the outline of a whole tree on the wall.
To give the interior brightness and originality will allow a complex drawing on the wall, created from cable products. Here it is important to think over the color of the wire finish so that it is in harmony with the design of the walls. The drawing can be decorated with various decorative elements. These can be themed stickers, ikebana, handmade items, decorative threads and garlands. The photo shows various interesting ways how to hide wires from the Internet and other equipment in an apartment.
To solve the question of how to hide the wires in the corridor, the implementation of an extraordinary option will help. It consists in creating a fence from wooden blanks, towering over the baseboard, behind which the cable is hidden. All elements are fixed to the wall with double-sided tape. For originality, you can make a multi-colored fence.
Fans of unusual design will love the imitation of a power plant created on the wall, to which the wires are attached. This option will allow not only to creatively disguise the wires, but also to create a base for teaching children.
How to hide wires from a TV into a wall: rules for internal masking
How to hide wires on the wall in a closed way? This option involves routing the wiring in previously created channels. This method is performed at the stage of renovation of the premises. The order of work is determined by the type of foundation.
To chisel a concrete wall, you will need a grinder or a perforator. Previously, it is worth drawing a line of wires. It should run strictly horizontally and vertically, turning at right angles. Diagonal spacers are not allowed. Along the planned route, with the help of a grinder, two parallel strips are made, the distance between which and the depth must correspond to the diameter of the cable twist.
Then, to form full-fledged strobes, it is necessary to hollow out the inner part with a perforator. Using a diamond bit, make a hole for a socket with an antenna outlet. There may be several power points, depending on the number of equipment connected to the TV.
In the prepared groove, cable products are laid, previously fastened with plastic clips, while ensuring a sufficient level of cord tension. The ends of the wires are connected to the socket according to the appropriate scheme. Further, the groove with the laid cable is sealed with plaster. After it dries, the surface should be primed and finished with a finishing putty.
Useful advice! The wiring in the room can be routed in the cable ducts of the floor skirting boards, which simplifies cable installation and ensures constant access to it.
If the TV panel on the wall is plasterboard, it is enough to make two holes in it. The first should be located behind the device in which the wiring will be hidden, and the second is done at the bottom of the wall at the junction with the baseboard (for convenient connection to the network).
Important! For convenience, it is better to use a plinth with a special recess for the cable, which will provide convenience when pulling the wire and eliminate the need to fear for damage.
How to hide wires from the Internet and cable TV in the corridor, if the walls have a decorative coating? In this case, the wiring algorithm is as follows. Use a sharp knife to cut the wallpaper. The material should be bent in different directions. With a construction tool, a groove is made in the wall. The cable is laid in the resulting recess. The hole can be repaired with plasticine or plaster. Next, the ends of the wallpaper are greased with glue and glued into place.
How to hide wires on the floor or ceiling: basic recommendations
The cable can be hidden above the floor. For this, special skirting boards are purchased with a masking niche for the cable. Before hiding the wires in the skirting board, its outer panel is removed, and the cable products are removed into the formed space. Then the panel is installed back. The advantage of this method is simple, quick and clean installation.
How to hide the wires under the plinth in the floor? For this, a groove is made in the surface using a perforator. The cable should be laid in a corrugation. The channel is closed with a cement-sand mortar. If the floor is made of wood, remove the necessary boards. Wires in a metal case are placed in the formed channel. Another way is to create a new screed on the floor, under which the cables are laid.
Important! If the cable is hidden in the floor, it must be laid in a special corrugation.
Cable products can run over the ceiling. If it is made of concrete, the holes are made in the same way as for the walls. How to hide wires on the ceiling when using suspended or tension structures? This cable routing is much easier. A space is created between the floor slab and the created ceiling where wires can be placed. This option is usually used to provide electricity to ceiling lighting fixtures. However, it can also be used as a communication line.
How to hide the wires from the TV on the wall using a box
If the room has already been renovated, chipping the walls for wiring for the TV will be an inappropriate option. In this case, the best solution to the question of how to remove the wires from the TV on the wall is to use special boxes. The advantages of this method are extremely simple installation, aesthetic appearance and compliance with fire safety standards. However, this option requires additional financial costs for the purchase of a decorative box.
A decorative box for wall wiring can be made of plastic or metal. There are combined product options. The box is also made from wooden battens or planed boards. The structure can be left intact or painted. This option will fit into a classic or rustic interior (in combination with wooden furniture and other decorative elements).
Metal products are made of aluminum. This box is very effective and aesthetic. It will look harmoniously in a futuristic interior. The plastic box looks simple and concise. It can be presented in any color.
Work begins with calculating the required amount of material, taking into account the size of the room and the direction of the cable products. The wires in the box must be free to space, so it is important to choose the right channel size.
Useful advice! If desired, the outer part of the box can be repainted in any color that will be in harmony with the wall decoration.
The cable duct on the wall for the TV must be fixed on the surface without fail. This can be done in several ways. The simplest solution is to use a special glue like liquid nails. It is advisable to use this option when fixing the box to a tile or other smooth surface.
Choosing the best place, height and location. Which bracket to give preference to. Advantages of wall mounting.
In the case of a wooden base or when using an aluminum profile, the correct solution would be to fix the cable duct in the wall using self-tapping screws, which should be spaced 40 cm from each other. If the box will be fixed to a brick or concrete wall, in this case, use dowels.
Important! The two parts of the channel should be connected by means of special ready-made corners.
How to hide wires in an apartment using furniture elements
The wiring can be hidden behind a piece of furniture near which the TV is located. The ideal solution in this case will be a transforming furniture, behind which all cords and cables will be hidden. There is a special area in it for placing the TV, which in this case can be attached to the wall or to the rear furniture panel.
How to hide wires under the TV? The best solution is a hinged panel with a built-in cable recess, closed by a door. It will not only hide cable products, but also become a functional element of the interior designed to store various things.
The TV can be located in a drywall niche that is part of a cabinet or rack. Behind it, the cabling is carried out, which will not be exposed to the public.
The problem of the presence of visible wires applies not only to the TV on the wall, but also to the computer or other office equipment. The easiest solution to the question of how to hide computer wires is to secure all communications under the table top with self-tapping clips or double-sided tape. The first step is to attach an extension cord under the tabletop.
Before you hide the wires under the table, they should be assembled into a bundle, they are fixed by means of binders. Next, the bundle is attached to the screws. A construction stapler is suitable for fixing the wires. It is easy to secure cables along the table leg using ordinary cable ties.
You can also use a special extension sleeve that attaches to the table top. Ordinary clamps for wires located along the back wall of the table look original. The photo shows how to hide the wires from the computer under or behind a table.
Useful tips for masking wires for TV and other equipment
Before you hide wires from a computer, TV, phones and other equipment in one place, you should mark cable products on both sides, which will further facilitate the search for the desired item. To prevent the cords from intertwining, it is recommended to use special ties.
Signal and data cables should be routed away from AC batteries. Such a solution will allow minimizing interference during the operation of equipment, which can manifest itself in data failure, noise in the columns, poor images. It is important to remember that the length of the video and audio cable is very important. The smaller it is, the lower the risk of interference, signal loss and other negative factors.
Important! The longer the audio / video cable, the better its quality should be.
The length of the optical cable does not matter much. Its quality is important here. It must be flexible enough without being fragile. The computer cable is laid with a certain margin of length. The power cable must be laid with optimum tension, avoiding any slack in the cable. Care should be taken not to bend the wires, as this can damage the inner sheath of the cable.
When openly masking cable products, keep the wires away from fluorescent lighting. You should not use elements with an outer shell in the form of a braided fabric, which will quickly lose its neat and aesthetic appearance. In addition, such a braid, if damaged, can provoke ignition of the cable.
The article discussed various ways to mask wires. Some of them are quite simple to implement, while others need a more serious approach and large-scale events. Internal camouflage is advisable at the stage of repair work. In the case of laying cable products in a decorated room, use external wiring. To do this, in hardware stores there are many devices for effective and original masking of household appliances cords.