Today, an acrylic bathtub is very popular among buyers: the size, variety of shapes and high performance characteristics put an acrylic product in first place in the rating of sanitary devices. About the distinctive features of products, the rules for choosing its dimensions, the rating of manufacturers and manufactured models can be found in this article.
- 1 What is an acrylic bathtub
- 2 Varieties of acrylic bathtubs
- 3 Acrylic bath: product sizes and configurations
- 4 How to find the right bath tub size for your bathroom
- 5 How to buy a quality and durable acrylic product
- 6 Acrylic bath insert: what is it
- 7 Acrylic Bathtub Manufacturers
- 8 Rating of acrylic bathtubs: sizes, photos and prices for products
What is an acrylic bathtub
An acrylic bathtub is a sanitary ware made of a thermoplastic polymer - acrylic, with the addition of plasticizers, dyes and stabilizers that improve the technical and operational properties of the product.
In turn, the bath can be made of 100% extrusion acrylic or a composite polymer. In the first case, the product has the best performance characteristics. They exhibit greater resistance to erosion and less deformation. The other two options have lower waterproofing performance, which is associated with the technical features of the material and manufacturing technology. However, these products have a lower cost in comparison with baths made of 100% acrylic.
An acrylic bathtub has the following performance characteristics:
- a high level of heat supply, which contributes to the slow cooling of water to room temperature;
- light weight of the product, which facilitates the transportation of the bath and the independent installation of the product;
- a variety of sizes and shapes of the product as a result of the fact that the polymer is easy to process at the stage of manufacturing the product;
- a wide range of colors and a variety of stylistic configurations allows the product to fit into any interior;
- a smooth and even surface is characterized by a self-cleaning effect, which allows dirt to slide freely from the walls of the product, without being absorbed into its body;
- after contact with water, the surface does not turn yellow or tarnish, which prolongs the life of the product;
- equipping bathtubs with various additional functions: hydromassage, aromatherapy, chromotherapy, color therapy, water pressure regulation, automatic surface disinfection;
- the ability to control the operation of the system using a remote control;
- various internal equipment of baths in the form of seats, headrests, handles, shelves.
Despite the advantages, acrylic bathtubs have disadvantages. The product has a low mechanical strength, so a slight mechanical impact can damage the bath. The cost of products exceeds the price of steel and cast iron counterparts, which, moreover, surpass acrylic in strength and durability. Acrylic bathtubs need delicate care. When exposed to the surface of the product with an abrasive cleaning agent, scratches are formed that spoil the appearance of the bath.
Note! The device must be installed on a special frame or a reinforced frame, which will reduce the likelihood of damage to the device under significant loads. In this case, it will be appropriate to mount a screen under the bath, the size of which is selected depending on the dimensions of the product and the height of the base.
Varieties of acrylic bathtubs
A product of any configuration can be created from a durable and plastic polymer. The rounded models captivate with the cleanliness of the lines of the multi-level steps, ledges and armrests. Acrylic bathtubs can be of the following form:
A rectangular acrylic bathtub is considered traditional, the photos clearly confirm this. It fits perfectly with the bathrooms of typical apartments. Despite its simple design, a product of this shape provides the maximum level of comfort. Cast acrylic bathtubs are mounted along one of the walls, depending on the size of the product and the layout of the room.
As the photos prove, corner acrylic bathtubs are very popular today, the sizes and prices of which are presented in a wide range, starting from 12 thousand rubles. and reaching 700 thousand rubles. This makes it possible to install the product in a room of any size with a different layout, without cluttering it. The bath can be left-handed or right-handed. The free side of the product can be concave, convex or rectangular. For large rooms, you can choose an overall model that resembles the shape of an isosceles triangle.
Useful advice! Corner products can be purchased complete with shower stall or for equipping a Charcot shower.
The oval design can lend elegance and respectability to the room. However, thanks to smooth lines, a product of even small dimensions will take up a lot of space and visually reduce the size of the room. It is advisable to install such bathtubs in spacious rooms.
Round acrylic models can hardly be called a full-fledged sanitary ware. To a greater extent, this is a luxurious decor element that will look spectacular on a small podium. Round bathtubs often have impressive dimensions, and are 2 m in diameter. The products are often equipped with additional functions, thanks to which they can be used as mini-pools for home spa treatments. Such an acrylic bathtub is made to order according to individual sizes.
Useful advice! When it is necessary to fit a plumbing device into a room with a complex configuration, an asymmetric acrylic bathtub should be chosen. In spacious, level rooms, you can install a product of any shape and size.
Acrylic bath: product sizes and configurations
A couple of decades ago, on the construction market, one could find single options for non-standard plumbing products.Manufacturers produced cast iron and steel baths of strictly regulated dimensions: 0.7x1.5 m, 0.7x1.7 m, 0.9x1.8 m. The assortment of products began to grow rapidly after the appearance of plastic acrylic. Due to the properties of the material, the product can be given any non-standard size and unusual shape.
When choosing a product, it is important to study what sizes of acrylic bathtubs are. Today manufacturers offer a long range of sizes ranging from compact models to large mini-pools. The standard dimensions of a rectangular acrylic bathtub are dimensions: length 1.2-1.8 m, width 0.7-0.8 m.
The optimum height for an acrylic bathtub is 0.65-7 m. The most popular device is 1.6x0.7 in size, which is suitable for most bathrooms in standard-layout apartments. Compact models 1.2x0.7 have appeared on the market, which can ideally fit into small-sized premises in limited space. And for spacious bathrooms, you can install a bathtub measuring 170 x 120 cm. However, there are also more overall models that can be classified as small pools.
Corner acrylic baths are very popular. Bathroom size symmetrical model starts from 0.9 m and reaches 1.8 m. Dimensions of asymmetric products range from 0.6x1.2 to 1.7x1.9. The largest bathtub measures 1.5 x 1.9 m and can comfortably accommodate two people.
How to find the right bath tub size for your bathroom
The correct choice of plumbing fixtures is based on the proportionality between the dimensions of the bath and the size of the room. For small rooms, it is advisable to install compact models that do not clutter up the room, and make it possible to install other furniture. In this case, the ideal solution is acrylic baths measuring 1.4x0.7 and 1.5x0.7 m.For large rooms, you can choose any model 1.2 m wide and 1.8 m long.
Useful advice! For rectangular rooms, it is appropriate to install the same bath, placing it along the wall, and for square rooms it is better to choose an angular model, which can be approached from either side.
The next criterion for choosing the optimal bath size is the physical characteristics of all family members. It is important to achieve harmony here so that everyone can enjoy water procedures and get the most out of them without feeling any discomfort. The dimensions of the bathroom should allow for a semi-recumbent state, in which maximum muscle relaxation occurs.
The most popular lengths for an acrylic bath are 1.4; 1.5; 1.8 m, and depends on the height of the person. The optimal product width is 0.9; 1.0; 1.2 m, which provides comfort and freedom of movement. It is most convenient to enter a bath with a height of 0.65-. And the depth of the product at least 0.5 m allows an adult to easily keep his head above the water in a reclining position.
How to buy a quality and durable acrylic product
The bath is a device with a long service life. Therefore, when choosing a product, you should be guided by the recommendations below in order to exclude the possibility of buying an expensive, but not high-quality product.
Manufacturing materials. Complete set and functionality. Installing a corner bath. Photos of popular models and the cost of products.
When choosing a specific model, it is necessary to study the thickness of the acrylic layer. To do this, you should shine an ordinary flashlight on one side of the bath. If light shines through on the other side of the product, the bath wall is too thin, which reduces the life of the device.
Important! A high-quality acrylic bathtub is made of cloths with a thickness of at least 5 mm.
The next step is to study the number of reinforcement layers. They can be seen at the edge of the walls. The layers resemble rings on a tree block. The more their number, the stronger the product. Next, tap the body. The high-quality performance of the selected model will be evidenced by a booming sound. If the bathtub has an unpleasant smell of chemicals, it is made of cheap material. When holding a hand over the surface of the product, dents, scratches and other defects should not be felt. You should carefully examine the color of the bath. It should be flat. If there are visible streaks on the surface, this is evidence of a defective product.
Acrylic bath insert: what is it
When it is not possible to purchase a new bathtub, and the old one can no longer be used, you can perform its restoration. One of the most popular, effective and reliable methods is the acrylic insert technology. This solution will save money associated with the purchase of a new acrylic bathtub, at the same time will allow you to get a quality product with similar characteristics.
Acrylic liner is a pressed sheet of sanitary acrylic, which is factory-formed according to the shape and size of an old bathtub and glued into it using special components. The insert is made for steel and cast iron baths of standard sizes. The length of the product can be 1.5 or 1.7 m, the width will be 0.57-0.61 m, depending on the width of the bath. The depth varies within 0.4-0.45 m.
When installing the insert into the old thicket, silicone rings are mounted around the overflow and drain holes, which makes it possible to achieve the sealing of the joints of the bath surface with the acrylic insert. A silicone sealant or two-component foam is applied to the surface of the old product. Next, an acrylic insert is inserted, and the drain and overflow system is connected. The bath is filled with water to allow the acrylic insert to fully settle to the base without leaving any voids. This creates the maximum strength and stability of the new product. After 10 hours, the bath is ready for further use.
The use of an acrylic insert allows not only to obtain a flawless appearance of the bath after restoration, but also creates the so-called "thermos effect". As a result, the bath heats up quickly and cools slowly, which contributes to a longer maintenance of hot water in the bowl. The product has a fairly high strength due to the fact that the outer surface of the insert is covered with fiberglass. The service life of the acrylic insert is at least 15 years with proper care of the product.
Important! It is forbidden to install acrylic inserts in steel and thin-walled cast iron baths due to the fact that the design of the bowls can be deformed.
The average cost of installing an acrylic liner is 5-7.5 thousand rubles. taking into account the price of the material. It depends on the size of the product and the implementation of additional measures associated with the installation of a new drain siphon and the dismantling of tiles, if the bathtub is installed in it.
Acrylic Bathtub Manufacturers
Today, a wide range of acrylic bathtubs of various shapes and sizes is presented on the construction market. And the price of a product primarily depends on the brand.Among the popular companies that have established themselves in the world market, the following manufacturers can be distinguished:
- Pool Spa;
- 1 Brand;
The Czech company Vagnerplast is a pioneer in the technology of manufacturing acrylic bathtubs, which uses high-quality cast acrylic made in England. The product range comes in a wide range of sizes and shapes to suit any budget. Here are presented rectangular products with a length of 1.5-2 m, a width of 0.7-0.9 m, and corner models with dimensions of 1.4x1.4; 1.5x1.0; 1.6x1.0 m.
Acrylic products from the Spanish manufacturer Pool Spa are characterized by high durability, which affects the cost of products. The company offers a wide range of baths, 1.2-2.0 m long and 0.7-1.2 m wide, and additional accessories for them. The most popular today are acrylic bathtubs, measuring 1.2-1.9 m in length and 0.7-1.4 m in width, from the Czech company Ravak. The products are distinguished by high quality workmanship, good performance characteristics, attractive design and reasonable cost. The company provides the longest warranty period of service, which reaches 12 years. The price of products is 10-400 thousand rubles.
Another manufacturer of high-quality acrylic products at an affordable price is the Polish-Romanian company Cersanit. The manufacturer's catalogs contain models of various configurations, 1.5-1.7 m long, 0.7-1.0 m wide, equipped with additional functions, except for hydromassage. The cost of products is in the range of 4-60 thousand rubles.
The Spanish company Roca is considered one of the best manufacturers of high quality acrylic products. Many years of experience, the use of the latest technologies, high quality raw materials, modern European equipment allows us to produce a wide range of products designed for any consumer request. The construction of acrylic bathtubs consists of a built-in frame, which increases the wall thickness of the product. This allows you to get a strong, wear-resistant and durable device. The manufacturer produces products with a length of 1.3-1.9 m, a width of 0.7-1.5 m. The cost of baths is in the range of 7.5-120 thousand rubles.
The Dutch company Riho produces a wide range of products, which are assembled in a series with the names of geographical objects, which includes products 1.4-1.7 m long, 0.9-1.4 m wide. Bathtubs are made on modern German equipment with the involvement of English components ... The cost of the product is 9-85 thousand rubles.
Domestic manufacturers of acrylic bathtubs
The first in the ranking of manufacturers of acrylic sanitary products is Triton. Since 2011, a new technology has been introduced in production - hand molding, which allows not only creating a product with a unique configuration, but also more wear-resistant and durable. This becomes possible due to the presence of complex polyester components in the product. Products are made here with a length of 1.2-2.05 m, a width of 0.7-1.5 m.
Acrylic baths are manufactured on modern American equipment using the technology of thermoforming from Australian acrylate. Despite the complexity of the technological process, the finished product is characterized by strength, resistance to deformation, and durability. Models with hydromassage function use metal nozzles, compensators, pumps, which ensures a long service life of products. The cost of the bath is 6-95 thousand rubles.
The main competitor of Triton is the equally well-known manufacturer Aquanet, which offers a wide range of acrylic sanitary ware of various parameters and configurations. The size range is 1.5-1.9 m in length and 0.7-1.2 m in width. The products are of high quality and optimal pricing policy. The cost of products is in the range of 8-35 thousand rubles.
BAS uses a vacuum forming method to manufacture acrylic products. The purchase of components takes place in Germany, the Czech Republic and Spain. The range of products starts from classic economy-class models of small dimensions, with a capacity of 130 liters, and ends with large-sized containers of the original configuration, with a capacity of 250-615 liters, additionally equipped with hydro and air massage. Here are bathtubs 1.2-1.9 m long and 0.7-1.4 m wide.Premium models are equipped with Antibac antibacterial protection based on silver ions, which prevents the growth of mold and pathogenic fungi, which means that it allows the product for a long time. maintain its original appearance. The cost of baths is in the range of 6-45 thousand rubles.
For the production of plumbing products, the company 1 Brand uses German cast acrylic, which allows you to create a durable and wear-resistant product at an affordable price. Most of the models have a hydromassage function and neon lighting, which allows you to fully enjoy the water treatment. The company produces bathtubs 1.3-2.0 m long and 0.7-1.3 m wide, and provides a 10-year warranty on its products. You can buy a product from a domestic manufacturer from 7 to 50 thousand rubles.
Rating of acrylic bathtubs: sizes, photos and prices for products
Among the popular premium class models, one can single out the Cersanit SANTANA 170 acrylic bathtub, which costs 7 thousand rubles. This is a rectangular product with dimensions of 1.7x0.7x0.41 m, equipped with wide comfortable bumpers, armrests and a headrest. The bottom of the bathtub is covered with a special anti-slip compound that reduces the risk of injury
Another budget model is a rectangular acrylic Roca Hall bathtub measuring 170 × 75 cm. The product has wide sides around the entire perimeter, which allows you to store personal hygiene products and other accessories. The price of the bath is 12.5 thousand rubles.
A popular acrylic corner bathtub is the Aquanet Graciosa R model, size 150x90 cm, which can be made with a right-side or left-side orientation and supplemented with hydromassage function, chromotherapy and underwater lighting. The price of the product is 13.5 thousand rubles.
Among the products of higher quality, one can distinguish a rectangular acrylic bathtub Riho Future with a size of 1.7x0.75 and a capacity of 180 liters. An oval bowl, equipped with a wide sloping headboard and comfortable side recesses, which allows you to comfortably take water procedures. The surface of the product is covered with a special gel, which protects the product from scratches, holes, chips and fading. The cost of the product is 16.5 thousand rubles.
The second place is taken by a corner acrylic bathtub measuring 1.5x0.75x0.57 m Ravak Behappy. The product has a non-standard configuration in which one part is narrowed. This allows the tub to be installed in a small room. The device can be equipped with additional features. The cost of the bath is 25 thousand rubles.
A popular model is the BAS Nicole product. The price of a bath with a hydromassage measuring 1.6x1.0x0.5 m is 36 thousand rubles. Here high quality and affordable price come together. Small dimensions of the product make it possible to fit the bath into a small room.
Today on the construction market there is a wide range of acrylic bathtubs of various shapes and sizes. Before making a choice in favor of a specific model, you should familiarize yourself with popular manufacturers and study the characteristics of the products offered.