Due to a number of unique properties, light weight and ease of installation, corrugated board is widely used for the construction of garden houses, garages, sheds. Fences from a metal profile turn out to be quite interesting: photos and video materials for installation give a complete picture of how to install a fence from a corrugated board with your own hands. Having studied the advice and recommendations of professionals, you can avoid mistakes during self-installation and have a reason to be proud of the installed structure.
- 1 Metal profile fences: photos, sizes and material prices
- 2 Do-it-yourself installation of a metal profile fence
Metal profile fences: photos, sizes and material prices
Decking is one of the modern materials that are successfully used for fences. It is distinguished by its versatility, high performance properties and can last up to 40 years. The metal profile is easy to maintain and its structures do not require seasonal repair. In addition, many craftsmen are happy to share tips on how to make a fence out of corrugated board with their own hands. Videos of the construction stages can be found on the Internet.
Dimensions of corrugated board for fences
Before proceeding with the installation of a fence made of corrugated board with your own hands, you need to familiarize yourself with the classification of the material, its main properties, fastening methods and other nuances. Knowing the main dimensions of the sheets of corrugated board for the fence, you can correctly design the structure, make an accurate calculation of the required elements and reduce excess material to a minimum. This approach will ultimately have a positive effect on the cost of the entire structure.
Profiled sheets are marked according to the following parameters: metal thickness, wave height (ribs) and wave step. Given these characteristics, three groups of material are distinguished:
- grade C - used for the construction of walls, partitions and fences;
- grade N - used in the construction of load-bearing elements, as well as for their strengthening;
- NS brand is a universal material for roofing, finishing of ceilings, walls.
The profiled sheet is made from rolled raw materials with a width of 0.98-1.85 m. What kind of corrugated board for fences is better? Give preference to a material that will provide the required rigidity to the fence structure and at the same time will not be too expensive.Excessive sheet thickness will not damage the structure, however, transportation and installation will be more difficult. The profiled sheet most suitable for the construction of fences has a thickness of 0.5-0.8 mm, and the height of the rib is from 8 to 20 mm.
Fences made of wood: photos of structures in a modern design. Types of wooden fences. Wooden fences: photos of beautiful structures. Wooden picket fence, board fences. Metal posts for fences.
When deciding which is better to choose a corrugated board for fences, take into account the wind load in your region and the requirements for sound insulation. If the adjoining territory borders on the roadway, choose a material with a metal thickness of 0.8 mm. For example, a C20 profiled sheet will perfectly cope with noise reduction.
Table 1. Dimensions of some popular grades of corrugated board used for fences:
|Profile brand||Basic parameters of corrugated sheets|
|Full sheet width, mm||Sheet width
Useful advice! When purchasing corrugated board with a colored coating, do not forget to buy a spray can of identical paint to handle accidental scratches and damage during installation.
Price for a sheet of corrugated board for a fence
Despite the fact that the profiled sheet has high strength, resistance to corrosion, temperature extremes, it is a quite affordable building material. Everyone can afford to buy corrugated board for a fence. Prices per sheet may differ from manufacturer to manufacturer, so you should carefully read the products and prices on the respective sites.
The cost of corrugated board depends on the thickness of the sheet, profile, type of coating and dimensions. The price of a metal profile for a fence per sheet can be determined based on the cost of 1 m2 of material.
Table 2. Prices of corrugated board for fencing, where sheets with a length of 2 m with a polymer protective coating are used:
|Profiled sheet mark||Price, rubles|
|unit of measurement||Sheet thickness, mm|
Table 3. Price of corrugated board with galvanized coating:
|Profiled sheet mark||Price, rubles|
|unit of measurement||Sheet thickness, mm|
Useful advice! When purchasing corrugated board, ask for data on the thickness of the sheet, since sellers are often silent about this, and this parameter is very important for the design of the fence.
To determine how much corrugated fences cost, you need to know the price of all components of the structure: racks, horizontal guides, fasteners and other elements. For supporting pillars, metal pipes of square or circular cross-section with a wall thickness of 4 to 8 mm are used.
Table 4. Estimated prices for fence posts from corrugated board:
|Round metal fence post, mm||Wall thickness, mm||Post length, m||Cost, rub.|
A metal post for a fence 60x60 mm from a profile pipe 3 m long with a plug and welded plates for fastening will cost 600 rubles, the cost of a galvanized post of the same length with a rectangular section 62x55 mm will be 730 rubles. a piece. What pipes to use for a fence from corrugated board? For racks, a 60x60 mm or 40x40 mm pipe is usually used, for gate and wicket supports - 80x80 mm.
Contacting the manufacturers, order accessories and materials for self-assembly. Check out the recommendations for the construction device by watching the video of installing a fence made of corrugated board with your own hands. You can apply for the installation of a turnkey fence. Photos, prices of corrugated fences with installation are available in the relevant sections on the companies' websites. They will also help you calculate the approximate cost of the structure online.
Do-it-yourself installation of a metal profile fence
The numerous photos of fences made of corrugated board with their own hands on the network confirm that these fences are aesthetically attractive, they can have various colors and design solutions. Sufficiently budgetary designs are made in the form of a continuous sheet of profiled sheet. Fences with brick pillars they look solid, but they are more expensive in price.
Installation tools and equipment
So that at the most crucial moment you do not have to suspend work, prepare in advance a set of tools and equipment necessary for installation. For installation fence will be required:
- tape measure, construction cord, stakes - all this is needed for marking;
- building level - to check the vertical and horizontal position of the fence elements;
- shovel - for the construction of a pit for a strip foundation, if such is provided for by the design;
- drill - for drilling holes for support legs. You can use a hand drill or a gas drill for wells;
- scissors for metal - will be needed in case of trimming sheets of corrugated board;
- welding machine - needed for attaching horizontal guides to the support posts;
- grinder - for cutting shaped pipes and cleaning the joints of elements;
- screwdriver - used for screwing in self-tapping screws when sheathing the frame with profiled sheets.
From materials, in addition to corrugated board, pipes for supports and logs, sand, crushed stone, cement for concreting pillars should be prepared. It will be useful to have a primer and paint available for processing metal surfaces.
We build fences from corrugated board with our own hands: video materials, recommendations
How to make a fence from corrugated board yourself? Work begins with the preparation of a site for construction. The perimeter line is cleared of vegetation and debris. Then markup is performed. To do this, stakes are driven in at the corners of the perimeter and a construction cord is pulled between them. Next, they begin to choose the distance between the posts of the fence made of corrugated board, as a rule, the step between the supports is 2-2.5 m, and sometimes 3 m.
At this stage, placements are recorded gate and an entrance gate. What pillars are needed for corrugated fences? Traditionally, a metal profile pipe of rectangular or square section is used for support posts. Its size is selected depending on the height of the fence and is 60x60 or 40x60 (mm). Some people use round pipes, but it is more difficult to attach horizontal guides to them.
Useful advice! Do not use metal pipes with a wall thickness of less than 2 mm for the support posts. This will negatively affect the strength of the structure.
How to install posts for fences made of corrugated board
The installation of fence posts from corrugated board is carried out in several ways. If a fence is planned from a solid profiled sheet, holes are dug under the supports, the bottom of which is covered with roofing material. The depth of the pits is from 0.9 m to 1.2 m. A pillar is placed in the pit, the space around it is covered with rubble, well tamped, moistened and concreted.
If the future design assumes the presence of brick pillars, then you need a strip foundation for a fence made of corrugated board with your own hands. To do this, a trench 0.7 m deep and about 20 cm wide is dug, a formwork 10-15 cm high is installed, a frame is prepared from reinforcement rods. Next, the frame is installed in the trench, pillars are installed in the designated places and poured with concrete mortar.
Before setting the solution, check the verticality of the installation of each pillar. In addition, the height of each support must be the same.This can be achieved by making a mark on each post corresponding to the ground level. You can check the correct installation with a construction cord stretched along the upper edge of the posts.
Helpful advice! When concreting pillars for a fence made of corrugated board, it is necessary to ensure that they are all in the same plane.
For setting the solution is kept for 4-5 days. Then it is necessary to weld consoles (mortgages) to the metal racks, to which the guides will subsequently be attached. The embeds are fixed at a distance of 20 cm from the upper and lower edge of the post. After that, you can brick the metal supports.
If the fence will have structures with brick pillars without a base, there is no need to arrange a strip base. Here it is enough to apply a local base device for each brick pillar. A hole is dug to a depth of about 1 m with a size slightly larger than the side of a brick column.
A video of the construction of a fence made of corrugated board with your own hands will help you understand the intricacies of installation.
How to put a fence made of corrugated board with your own hands
As soon as all the support posts are installed, you can fasten the transverse lags. As guides, profile pipes with a smaller section are used than support pillars. Usually pipes with a section of 20x40 mm or 20x20 mm are used. For fences up to 2.5 m high, two rows located at a distance of 1.5 m from each other are quite enough.
How to make a fence from corrugated board with your own hands? After the frame of the structure is completely assembled, they begin to cover it with a professional sheet. It is fixed by means of special self-tapping screws, the cap of which is covered with a polymer composition of the corresponding color. Such hardware makes the attachment points almost invisible. Before sheathing, it is recommended to make holes in the fastening points.
Helpful advice! Self-tapping screws must be screwed strictly perpendicularly in those places where the ribs are tightly adjacent to the frame elements.
Sheets of corrugated board are overlapped, while the wave of the sheet with a smaller edge should be covered with a wave with a larger edge. It is customary to choose the distance between the fasteners equal to two waves of the profiled sheet.
Fences made of corrugated board are strong and durable. Thanks to a wide range of colors, you can choose a material of any color and profile shape. It is flawlessly combined with stone, brick, metal and can support the style of the buildings in the yard. Having studied useful recommendations and video clips on the installation of fences from corrugated board, you can easily install a modern, reliable and, most importantly, inexpensive fence yourself.